Mohammad Neshati | Electrical Engineering | Best Researcher Award

Posted on by ScienceFather

Assoc. Prof. Dr . Mohammad Neshati | Electrical Engineering | Best Researcher Award

Assoc. Prof. Dr . Mohammad Neshati, Ferdowsi University of Mashhad, Iran

Dr. Mohammad Hassan Neshati is an Associate Professor in the Department of Electrical Engineering and Electronics at Ferdowsi University of Mashhad, Iran. Born in Yazd in 1959, he specializes in microelectronics, microwave engineering, and antenna design. With over two decades of academic and research experience, Dr. Neshati has been a reviewer and editorial board member for esteemed journals such as IEEE-AP and the International Journal of Antennas and Propagation. A senior IEEE member, he has supervised numerous MSc and PhD students. Dr. Neshati is fluent in English and Persian, contributing significantly to advancements in dielectric resonator antenna technologies.

Publication Profile

Orcid

Education

Dr. Neshati earned his PhD in Electrical Engineering from UMIST (University of Manchester Institute of Science and Technology), UK, where he specialized in numerical modeling and application studies of rectangular dielectric resonator antennas. Before that, he obtained his MSc in Electronics from Amir-Kabir University of Technology, Tehran, focusing on telemetry and radio frequency circuit design. His academic journey began with a BS degree in Electrical Engineering from Isfahan University of Technology, Iran. Throughout his education, Dr. Neshati demonstrated exceptional academic performance, earning scholarships and accolades for his research contributions.

Experience

Dr. Neshati has extensive teaching and research experience, beginning as an Instructor at Sistan & Baluchistan University (1989–1996), later becoming an Assistant Professor there until 2007. He then joined Ferdowsi University of Mashhad, progressing from Assistant Professor (2007–2008) to Associate Professor (2008–present). Dr. Neshati serves on editorial boards of several international journals and is a reviewer for IEEE journals. He has also mentored numerous MSc and PhD students, contributing significantly to academic research and engineering education. His expertise covers microelectronics, microwave devices, antennas, and network analyzers, supported by advanced proficiency in simulation tools like MATLAB, HFSS, and ADS.

Awards and Honors

Dr. Neshati has been a Senior Member of IEEE since 2013 and a regular member since 2000. He was awarded a prestigious scholarship to pursue his PhD studies at UMIST, where he was recognized as a top selected PhD student during 2000–2001. His academic excellence, leadership in research, and significant contributions to the fields of microwave engineering and antenna design have earned him notable distinctions. In addition, his editorial roles in prominent journals further highlight his standing in the scientific community. Dr. Neshati’s awards underscore his commitment to advancing research and fostering academic excellence in electrical engineering.

Research Focus

Dr. Neshati’s research centers around microelectronics, microwave engineering, and advanced antenna systems, particularly focusing on rectangular dielectric resonator antennas (RDRAs). His PhD work combined theoretical modeling, numerical simulation using FEM, and experimental validation of RDRAs. Key areas of investigation include resonance frequency optimization, radiation patterns, Q-factor, impedance bandwidth, and coupling mechanisms. His studies explore various feed structures like probe-fed and microstrip-coupled systems, addressing practical challenges such as fabrication imperfections. Dr. Neshati’s current research extends to dual-band antennas, backward radiation reduction, and dielectric resonator applications, contributing innovations in wireless communication and RF systems design.

Publication Top Notes

  • Development of a Compact Microstrip Antenna Using Slow-Wave Artificial Dielectric Substrate – Microwave and Optical Technology Letters (2025) 📡, DOI: 10.1002/mop.70191

  • Textile-based high-gain bow-tie antenna using metamaterials for medical applications – Engineering Reports (2024) 🏥, DOI: 10.1002/eng2.12949

  • Efficient Design Procedure for Combline Bandpass Filters With Advanced Electrical Responses – IEEE Access (2023) 🔧, DOI: 10.1109/ACCESS.2023.3278791

  • Equivalent Circuit Modeling of a Transmission Mode FSS Structure with Anisotropic Substrate and Enhanced Parameters – Iranian Journal of Science and Technology, Transactions of Electrical Engineering (2022) 🔬, DOI: 10.1007/s40998-022-00489-2

  • Development of a New Method for Pattern Synthesizing of Linear and Planar Arrays Using Legendre Transform With Minimum Number of Elements – IEEE Transactions on Antennas and Propagation (2022) 📡, DOI: 10.1109/TAP.2021.3137200

  • A new noniterative method for pattern synthesis of unequally spaced linear arrays – International Journal of RF and Microwave Computer-Aided Engineering (2019) 🔧, DOI: 10.1002/mmce.21921

  • Crosstalk analysis of uniform and nonuniform lossy microstrip‐coupled transmission lines – International Journal of RF and Microwave Computer-Aided Engineering (2019) ⚡, DOI: 10.1002/mmce.21916

  • Crosstalk analysis of multi‐microstrip coupled lines using transmission line modeling – International Journal of RF and Microwave Computer-Aided Engineering (2019) ⚡, DOI: 10.1002/mmce.21677

  • Design and Development of High-Gain SIW H-Plane Horn Antenna Loaded With Waveguide, Dipole Array, and Reflector Nails Using Thin Substrate – IEEE Transactions on Antennas and Propagation (2019) 📡, DOI: 10.1109/TAP.2019.2896445

  • Input impedance modeling of patch and semi-rectangular substrate integrated waveguide cavity hybrid antenna – AEU – International Journal of Electronics and Communications (2018) 🔧, DOI: 10.1016/j.aeue.2018.03.013

Rebecca Alowo| Engineering | Best Researcher Award

Posted on by ScienceFather

Dr. Rebecca Alowo| Engineering | Best Researcher Award

Assist. Prof. Dr. Komal Bansal, Dev Samaj College for Women, Affiliated to Panjab University Chandigarh, India, 

Dr. Rebecca Alowo is a distinguished researcher whose work bridges the gap between engineering and societal impact. Her research in sustainable groundwater management and WASH has transformed lives in Uganda and beyond. Her teaching and advocacy roles complement her research, highlighting her as a well-rounded candidate with an excellent balance of academic rigor, leadership, and practical impact.

Publication Profile

Scopus

 Experience:

Dr. Alowo is currently a Lecturer in the Department of Civil Engineering Technology at the University of Johannesburg, where she teaches courses such as Hydraulics, Water Reticulation Design, and Water & Wastewater Engineering. Since 2020, she has integrated innovative online teaching methods and assessment tools. Previously, she served as a lecturer at Central University of Technology, Vaal University of Technology, and the University of Free State, focusing on Strength of Materials and supervising master’s students. She also participated in consultations for the Water Technologies Demonstration Programme and reviewed research for international conferences. During her time at the University of Cambridge, she contributed to sustainable development projects, including the Cornwall Sustainable Development Plan and the evaluation of the Cambridge Guided Busway.

 

Educational :

Dr. Rebecca Alowo earned her Doctor of Engineering in Civil Engineering from the Central University of Technology, Free State, South Africa, where she conducted groundbreaking research on sustainable groundwater management through hydrological parameter modeling in the Modder River Catchment (2016–2021). She completed her Master of Philosophy in Engineering for Sustainable Development at the University of Cambridge, UK (2008–2009), focusing on community water resources management as a driver of development in Uganda. Her academic journey also includes a Post-Graduate Diploma in Project Planning and Management from Uganda Management Institute, Kampala, Uganda (2005–2006), and a Bachelor of Science in Civil Engineering with honors from Makerere University, Kampala, Uganda (1998–2003). Earlier, she excelled in her secondary education at Mt. St Mary’s College Namagunga, earning distinctions in key subjects for both her Uganda Advanced Certificate of Education and Uganda Certificate of Education.

 

Awards & Fellowships:

Dr. Alowo successfully lobbied for the establishment of Uganda’s WASH Parliamentary Forum and was recognized for her contributions to ICT-based solutions in water and sanitation management.

Technical Skills:

Dr. Alowo is proficient in GIS-based Management Information Systems and advanced hydrological modeling tools. She is also skilled in leveraging e-learning platforms such as Blackboard for modern teaching methodologies.

Publication Top Notes:

  • Title: An Investigation on Construction Project Development Planning Delays in South Africa
    • Authors: Nyaga Githae, B.; Hagir, H.; Alowo, R.
    • Year: 2024
    • Citations: 0
  • Title: GIS-based Vulnerability Model Assessment of The Alexandra Jukskei Catchment in South Africa
    • Authors: Gadisi, V.; Alowo, R.; Nkhonjera, G.
    • Year: 2024
    • Citations: 0
  • Title: Apps for Monitoring of Hydrological Parameters in the Alexandra Jukskei Catchment in South Africa
    • Authors: Achiro, D.; Alowo, R.; Nkhonjera, G.
    • Year: 2024
    • Citations: 0
  • Title: Understanding Land Use Planning and Sustainable Development from the Perspective of Smart Groundwater Monitoring
    • Authors: Kubuya, A.K.; Alowo, R.; Nkhonjera, G.
    • Year: 2023
    • Citations: 0
  • Title: Pollution in the Urban Environment: A Research on Contaminated Groundwater in the Aquifers Beneath the Qoboza Klaaste (QK) Building at University of Johannesburg in South Africa
    • Authors: Patience, D.; German, N.; Jeffrey, M.; Alowo, R.
    • Year: 2023
    • Citations: 0
  • Title: A Modelling Framework for Groundwater Sustainability in the Upper Orange Catchment of South Africa
    • Author: Alowo, R.
    • Year: 2023
    • Citations: 0
  • Title: Characterisation of Local Borehole Water within the Platinum Belt in Mokopane, Limpopo, Republic of South Africa
    • Authors: Weber, M.E.; Alowo, R.; Nkhonjera, G.
    • Year: 2023
    • Citations: 0
  • Title: Implementing a Groundwater Monitoring System in the Jukskei River Catchment: A TypeScript and MySQL Approach
    • Authors: Achiro, D.; Alowo, R.; Nkhonjera, G.
    • Year: 2023
    • Citations: 0
  • Title: The Development of an Application for Groundwater Management in Jukskei River Catchment of South Africa
    • Authors: Achiro, D.; Alowo, R.; Nkhonjera, G.
    • Year: 2023
    • Citations: 0
  • Title: Apps for Smart Groundwater Monitoring and Assessments: A Case Study of Regideso Catchment in Kimbanseke
    • Authors: Kabuya, A.K.; Alowo, R.; Nkhonjera, G.K.
    • Year: 2022
    • Citations: 0

Conclusions:

Dr. Alowo is a strong candidate for the “Best Researcher Award.” Her ability to translate research into actionable solutions, particularly in underprivileged communities, sets her apart. With further enhancement of her publication record and expansion of global collaborations, she could be a leading figure in sustainable development research worldwide

Junshu Zhang | Engineering | Best Researcher Award

Posted on by ScienceFather

Dr. Junshu Zhang | Engineering | Best Researcher Award

Dr. Junshu Zhang, Huazhong University of Science and Technology, China

Dr. Junshu Zhang specializes in structural health monitoring and flexible electronics. His research focuses on improving sensor systems, including recognizing bolt loosening and developing mechanical models for flexible sensors. He has contributed to strain transfer models that predict sensor properties and eliminate environmental factors. With 7 ongoing research projects, 3 patents, and 4 published journal articles, Dr. Zhang is a key innovator in his field. He holds professional membership with the Chinese Society for Vibration Engineering. 🌐

Publication Profile

Scopus

Academic and Professional Background

Dr. Junshu Zhang is a prominent researcher specializing in structural health monitoring and flexible electronics. His work focuses on advancing sensor technologies, particularly in the recognition of bolt loosening and the development of mechanical models for flexible sensors. By establishing strain transfer models, Dr. Zhang aims to predict sensor properties and eliminate the influence of environmental and material factors. With 7 ongoing research projects, 3 patents, and several published journal articles, he is making significant contributions to the field. He is a member of the Chinese Society for Vibration Engineering. 🌐

 

Research Focus 🧑‍🔬

Dr. Junshu Zhang’s research primarily focuses on structural health monitoring and flexible electronics, with a strong emphasis on developing innovative sensor technologies. His work includes bolt preload impact modulation, improving the strain transfer model for flexible sensors, and enhancing measurement calibration for piezoresistive sensors. He has contributed to the design of graphene nanoplatelets-based strain sensors and non-uniform shear stress models to improve sensor accuracy. These efforts aim to optimize sensor performance in structural monitoring systems and flexible electronics. Dr. Zhang’s contributions are central to the advancement of sensor mechanics and sensor applications. 📊📐

 

Publication Top Notes

  • Cointegration-based impact modulation for bolt preload under the influence of percussion force (2024) 🔧
  • Measurement Calibration of Flexible Piezoresistive Sensors Based on Strain Transfer Model Accounting for Coating Effect (2024) 📏
  • Graphene Nanoplatelets/Polydimethylsiloxane Flexible Strain Sensor with Improved Sandwich Structure (2024) 🛠️ – Cited by 2
  • Improved strain transfer model for flexible sensors based on non-uniform distribution of shear stress in each layer (2024) 📐 – Cited by 2

Ndy von kluge Paul | Mechanic | Excellence in Research

Posted on by ScienceFather

Dr. Ndy von kluge Paul | Mechanic | Excellence in Research

Dr. Ndy von kluge Paul, University of yaounde1, Cameroon

Dr. Paul Ndy von Kluge is a dedicated academic and civil engineer from Cameroon, currently serving as a permanent lecturer at the University of Yaoundé I, UIT Bois de Mbalmayo. With a PhD in Physics and Civil Engineering, his research focuses on nonlinear dynamics, chaos, and stochastic excitation in structural systems. Dr. Ndy has significant experience in civil engineering projects, including the Memve’ele Hydroelectric Dam. He has published numerous articles and books on mechanics and vibration control. Fluent in French, English, and German, Dr. Ndy is also a skilled programmer and proficient in engineering design software. 🏗️📚🔬

 

Publication Profile

Orcid

Academic Background & Research Focus 🎓🔬

Dr. Ndy von Kluge Paul holds a PhD in Physics from the University of Yaoundé 1, specializing in Nonlinear Pounding and Engineering Failure Analysis of non-smooth structural systems subjected to stochastic excitations. His research includes nonlinear dynamics, chaos theory, active nonlinear control, and dry friction dynamics. He completed his Master’s in Physics with a thesis on Dry Friction Oscillators under two-frequency excitations. Additionally, he earned a Master’s degree in Civil Engineering from ENSET, University of Douala, focusing on road requalification and construction of public works. His diverse expertise contributes to advanced structural control and analysis. 🏗️⚙️

 

Employment History 🏢🔧

Dr. Ndy von Kluge Paul has extensive experience in both civil engineering and academia. From 2009 to 2011, he served as an Ingénieur des Travaux Publics at the University of Yaoundé 2 Soa, working in the Direction of Infrastructures, Planning, and Development (DIPD). Between 2011 and 2020, he was assigned to the Ministry of Water and Energy (MINEE) and contributed to the Memve’ele Hydroelectric Project, overseeing the construction of the hydroelectric plant and energy evacuation systems. From 2020, he worked at Electricity Development Corporation (EDC) on maintenance projects for the Memve’ele Dam. Since May 2024, he has been a permanent lecturer at Université de Yaoundé 1. 🎓⚡🔨

 

Teaching Experience 📚👨‍🏫

Dr. Ndy von Kluge Paul has a rich teaching background spanning several years. From 2002 to 2006, he taught Physics, Chemistry, and Mathematics at Collège Privé Laïc ‘Les Bambis’ and other institutions. He also worked as a temporary secondary school teacher. Between 2011 and 2023, he provided professional supervision for students from major engineering schools like Polytechnique, FGI Douala, ENSTP at the Memve’ele Hydroelectric Project site. In 2021-2022, he taught at Institut Universitaire NGODO Melingui. Since 2022, he has been supervising DUT and License students at UIT Bois, University of Yaoundé 1. 🎓📘

 

Research Interests 🌐🔧

Dr. Ndy von Kluge Paul’s research spans a wide array of dynamic fields. His primary focus includes Spatiotemporal Chaos, Electrical Lines, and Nonlinear Oscillators, with an emphasis on Mathematical Modeling and Computational Analysis of complex systems in Electromechanics and Fluid Dynamics. His work extensively explores Dissipative Systems, contributing significantly to the fields of Civil Engineering, Mechanical Engineering, and Powertrain Dynamics. Additionally, Dr. Paul has made notable advancements in Non-linear Vibration, Vibro-acoustics, and Noise Control, driving innovations in various engineering applications. ⚙️📐🌊

 

Publication Top Notes

Application to nonlinear mechanical systems with dry friction: hard bifurcation in SD oscillator

Kiran Bhaskar | Engineering | Best Researcher Award

Posted on by ScienceFather

Dr. Kiran Bhaskar | Engineering | Best Researcher Award

Controls Engineer, Wabtec Corporation, United States

Dr. Kiran Bhaskar is an accomplished researcher and engineer specializing in battery systems and electrification. Holding a Ph.D. and M.S. in Mechanical Engineering from Pennsylvania State University (GPA 3.98/4), he has contributed significantly to the modeling, fault detection, and optimization of lithium-ion battery systems. Dr. Bhaskar has co-authored impactful publications in Applied Energy and IEEE Transactions on Transportation Electrification. As a Controls Engineer at Wabtec Corporation, he focuses on energy management for hybrid locomotives. With extensive technical expertise in MATLAB, Simulink, and Python, he excels in developing innovative solutions for sustainable energy and transportation systems. 🚆🔋

Publication Profile

Orcid

Google Scholar

🎓 Academic Journey

Dr. Kiran Bhaskar has a distinguished academic background in mechanical engineering. He pursued his PhD and MS at The Pennsylvania State University, University Park, PA (2019–2024), achieving an impressive GPA of 3.98/4. Earlier, he graduated from the Indian Institute of Technology (IIT) Madras with a B.Tech (Hons) in Mechanical Engineering and a Minor in Operations Research (2013–2018), along with an M.Tech in Thermal Engineering, earning a GPA of 8.7/10. Additionally, he broadened his horizons through a semester abroad at Czech Technical University, Prague (2017). His academic excellence reflects his dedication to engineering research and innovation. 📚🌟

 

🔬 Academic Research Experience

Dr. Kiran Bhaskar has extensive research experience in battery systems and energy optimization. At Pennsylvania State University, he developed models for parallel cell degradation, proposing a novel capacity-resistance matching strategy to enhance battery pack performance and minimize aging. His work includes fault detection through Lyapunov-based observers and real-time diagnosis schemes for internal short circuits. He also pioneered data-driven sensor reconstruction techniques, anomaly detection algorithms using PCA, and coupled SoC and SoH estimation for Li-ion batteries. Additionally, he optimized energy management in hybrid-electric locomotives and studied emissions reduction through injection parameter optimization during his tenure at IIT Madras. ⚡🔋📊

 

🌟 Industry Research Experience

Dr. Kiran Bhaskar has diverse industrial experience in energy management and automotive innovation. As a Controls Engineer at Wabtec Corporation, he developed advanced algorithms for battery pack health monitoring, including SoC, SoH, and anomaly detection techniques. During a summer internship there, he created Simulink models for fault detection and sensor signal reconstruction. At Rivigo Logistics, he optimized market truck utilization, reducing revenue leakage by 5%. Interning at TVS Motor Company, he automated SI engine calibration for BMW engines, while at Ashok Leyland, he modeled airflow estimation in SI engines using Simulink. His work spans energy, logistics, and automotive sectors. 🚂🔋🚛

 

🏆 Awards and Honors

Dr. Kiran Bhaskar has received numerous accolades for his academic excellence and research contributions. He was honored with the prestigious Thomas and June Beaver Award (2024) for outstanding industrially-sponsored research at Pennsylvania State University and recognized as an ASME Dynamic Systems and Control Division Rising Star at the 2023 MECC. Twice a finalist for the Energy Systems Best Paper Award (2024), he also secured runner-up positions in poster sessions at IndustryXchange (2022, 2023). Additionally, he earned the Prime Minister’s Scholarship for academic excellence and ranked 1666th nationally (99.86 percentile) in the IIT-JEE Advanced Examination. 🌟📜🎖️

 

🔋 Research Focus

Dr. Kiran Bhaskar specializes in battery technology and energy systems, with a focus on lithium-ion batteries. His research includes thermal anomaly detection 🔥, state of charge and health estimation ⚡, and short-circuit detection in battery packs. Dr. Bhaskar has developed innovative methods for fault detection 🛠️, sensor signal reconstruction 🔍, and diagnosing heterogeneity-induced losses in parallel-connected cells. He also explores advanced techniques for anomaly diagnosis 🚨 and health monitoring of battery systems. His contributions enhance battery efficiency and safety, driving progress in electrification and sustainable energy solutions. 🌱🔧📈

 

Publication Top Notes 📚

  • Data-driven thermal anomaly detection in large battery packs 🔥 – Cited by 21 (2023)
  • State of Charge and State of Health estimation in large lithium-ion battery packs ⚡ – Cited by 4 (2023)
  • Detecting synthetic anomalies using median-based residuals in lithium-ion cell groups 🔍 – Cited by 4 (2022)
  • Detection of engine knock using speed oscillations in a single-cylinder spark-ignition engine 🚗 – Cited by 3 (2019)
  • Heterogeneity-induced power and capacity loss in parallel-connected cells 📉  (2024)
  • Short Circuit Estimation in Lithium-Ion Batteries Using Moving Horizon Estimation 🔧(2024)
  • Post-Damage Short Circuit Detection in Lithium-ion Batteries 🚨 (2024)
  • Faulty sensor signal reconstruction in Li-ion battery packs 🛠️ (2024)
  • Anomaly diagnosis and health monitoring of lithium-ion battery packs 🩺 (2024)

 

 

 

HARPREET AASI | Engineering | Women Researcher Award

Posted on by ScienceFather

HARPREET AASI | Engineering | Women Researcher Award

Dr HARPREET AASI, INDIAN INSTITUTE OF TECHNOLOGY BOMBAY, India

Dr. Harpreet Aasi is a Postdoctoral Fellow in Thermal Engineering at IIT Bombay (2024–present). He holds a Ph.D. in Thermal Engineering from IIT Roorkee (2014–2020), an M.Tech. from NIT Raipur, and a B.E. in Mechanical Engineering. His expertise lies in heat transfer enhancement, particularly using ultrasound in electronic cooling systems, involving both numerical (ANSYS Fluent) and experimental methods. A recipient of multiple awards, including the Silver Medal at NIT Raipur, Dr. Aasi has contributed to prestigious projects sponsored by CSIR and DST. He is also an active reviewer for high-impact journals and has published extensively in heat exchanger optimization. 📚💡

Publication Profile

Scopus

Education

Dr. Harpreet Aasi is a distinguished researcher specializing in thermal engineering. Currently, he is pursuing a Postdoctoral Fellowship at the Indian Institute of Technology Bombay (March 2024 – present). He earned his Ph.D. with honors in Thermal Engineering from IIT Roorkee (2014-2020) and completed an M.Tech. in Thermal Engineering with an impressive CPI of 8.96/10 at NIT Raipur (2011-2013). His academic journey began with a B.E. in Mechanical Engineering from New Government Engineering College Raipur, achieving a stellar CPI of 8.99/10 (2006-2010). Dr. Aasi’s dedication to academics is reflected in his strong foundations, scoring 76% in Intermediate (2005-2006) and 85% in Matriculation (2003-2004). 📚✨

Experience

Dr. Aasi conducted numerical (Ansys Fluent) and experimental studies (non-intrusive optical techniques) on single-phase and two-phase flow boiling processes for electronic cooling systems. This research explored the effect of ultrasound parameters, demonstrating its potential for enhancing heat transfer. Ph.D. Research: Investigations on Three-fluid Compact Plate-fin Heat Exchanger 🌡️📊 Dr. Aasi performed extensive experimental and numerical investigations (MATLAB coding) under transient and steady states, addressing flow maldistribution, inlet temperature non-uniformity, and ambient heat interaction. Innovative modeling optimized geometrical attributes for diverse plate-fin types. M.Sc. Research: Parametric Study of Orthotropic Annular Fin with Contact Resistance 🌀🛠️ Dr. Aasi developed a 2D dimensionless steady-state model to assess the thermal performance of orthotropic annular fins, focusing on polymer matrix composites with axis-dependent properties.

Award and Scholarships

Dr. Harpreet Aasi has an impressive academic record, including a Silver Medal at the National Institute of Technology (NIT) Raipur in 2012-2013 🥈. He received the Academic Excellence Award at NIT Raipur in 2011-2012 🎓. Ranked 10th in the Chhattisgarh Swami Vivekanand Technical University state toppers list, he was 1st in New Government Engineering College Raipur in 2010 🏆. Dr. Aasi secured prestigious fellowships, including the Institute Postdoctoral Fellowship at IIT Bombay in 2024 🧑‍🔬 and MHRD scholarships for his Ph.D. (2014-2019) and M.Tech. (2011-2013) 📚. Additionally, he earned state-level merit scholarships during his B.E. studies (2007-2010) 🏅.

Project contribution

Dr. Harpreet Aasi has conducted groundbreaking research on optimizing the performance of three-fluid heat exchangers through both numerical and experimental investigations. Sponsored by CSIR, this research aims to improve heat transfer efficiency and system performance. Additionally, his study on the effect of temperature and flow nonuniformities on three-fluid compact heat exchangers, sponsored by DST, delves into understanding how such factors influence overall efficiency. These contributions are crucial in advancing thermal management systems, with potential applications in various industries, from energy to manufacturing. 🌡️🔧

Research focus

Dr. Harpreet Aasi’s research primarily focuses on the thermo-hydraulic performance and optimization of multi-fluid heat exchangers, particularly three-fluid systems. His work investigates the effects of flow non-uniformity, ambient heat ingression, and temperature nonuniformity on the efficiency and dynamic behavior of cross-flow and plate-fin heat exchangers. Using advanced techniques like Artificial Neural Networks (ANN) and second law analysis, he aims to improve heat exchanger designs for enhanced thermal management in various engineering applications. His research is crucial for energy efficiency and thermal optimization in industries such as cryogenics, power generation, and heat recovery. 🔥🔧⚙️💡

Publication top notes

Investigation on cross-flow three-fluid compact heat exchanger under flow non-uniformity: an experimental study with ANN prediction

The impact of ambient heat ingression on performance of cryogenic three-fluid cross-flow compact heat exchanger

Experimental investigation and ANN modelling on thermo-hydraulic efficacy of cross-flow three-fluid plate-fin heat exchanger

Detailed design optimization of three-fluid parallel-flow plate-fin heat exchanger using second law analysis

Influence of flow non-uniformity on the dynamic behaviour of three-fluid cross-flow compact heat exchanger

A novel equivalence approximate model for second law based optimization of three-fluid cross-flow plate-fin heat exchanger using genetic algorithm

 

Ali Fardoost | Engineering | Best Researcher Award

Posted on by ScienceFather

Mr. Ali Fardoost | Engineering | Best Researcher Award

Graduate Research Assistant, Rutgers University,  United States

Ali Fardoost is a Ph.D. student in Electrical Engineering at Rutgers University, with a strong focus on biosensing, biosensor fabrication, and nanobiotechnology. His research involves the development of innovative cancer biomarker detection systems, microfluidics, and nanowell-based biosensors. With a B.Sc. from the University of Tehran, his academic achievements include a top ranking and an award-winning thesis on cancer detection using real-time impedance measurement. Ali has hands-on experience in cleanroom environments and expertise in advanced software tools. His contributions are demonstrated in several publications, reflecting his dedication to advancing healthcare diagnostics and nanotechnology.

Publication Profile :

Scopus

Educational Background :

Ali Fardoost holds a Ph.D. in Electrical Engineering from Rutgers University and a B.Sc. from the University of Tehran, with excellent academic records (GPA of 4/4 and 3.64/4, respectively). His B.Sc. thesis, which developed a system for differentiating healthy and cancerous lymph nodes, reflects a focus on real-world, critical health issues. Being ranked in the top 0.07% of a national university entrance exam and being recognized as an exceptional talent at the University of Tehran further underscore his academic excellence and intellectual prowess.

Professional Background :

Ali Fardoost is a dedicated researcher currently pursuing his Ph.D. in Electrical Engineering at Rutgers University, with a focus on biosensor development for cancer biomarker detection. He is a Graduate Research Assistant in the NanoBioElectronics Lab, where he designs and fabricates nanowell-based biosensors for healthcare applications. His prior experience includes research on blood impedance spectroscopy for breast cancer diagnosis at the University of Tehran. Ali has developed and tested various biosensors, combining his skills in microfabrication and data analysis. His work aims to innovate in biomedical diagnostics, with a particular focus on cancer detection technologies.

Research Interests :

Ali Fardoost’s research interests span a range of cutting-edge topics in biosensing, biosensor fabrication, microfluidics, nanobioelectronics, and cancer biomarker detection. His focus on developing biosensors for cancer detection, particularly using microfabrication techniques and impedance spectroscopy, aligns with the forefront of bioengineering research. Additionally, his work on nanobiotechnology indicates his commitment to advancing interdisciplinary research, blending electrical engineering with biomedical applications. These areas are pivotal for innovations in healthcare, specifically in diagnosing and monitoring cancer, a critical global health concern.

Research Experience :

Ali has extensive research experience at both Rutgers University and the University of Tehran. His work includes fabricating biosensors for cancer biomarker detection, performing blood impedance spectroscopy for breast cancer diagnosis, and measuring the impedance of thyroid nodules for intraoperative assessment. His hands-on expertise in microfabrication, sensor design, and real-time diagnostics, coupled with his contributions to impactful projects such as cancer detection, demonstrates his deep engagement in the practical application of his research.

Award And Recognition :

Ali Fardoost has been recognized for his exceptional academic and research achievements. He was awarded the Best B.Sc. Thesis Award at the University of Tehran in 2023 for his innovative work on cancer detection using impedance measurement. Additionally, he was accepted for a Master’s program without the need for an entrance exam due to his exceptional academic performance. Ranked 25th among all undergraduate students at the University of Tehran’s College of Electrical and Computer Engineering, Ali also placed in the top 0.07% of participants in Iran’s highly competitive Nationwide University Entrance Exam (Konkoor).

Conclusion :

Ali Fardoost’s strong academic background and cutting-edge research in biosensing, cancer biomarker detection, and nanobiotechnology make him a highly suitable candidate for the Research for Best Researcher Award. His Ph.D. work at Rutgers University and B.Sc. from the University of Tehran demonstrate his exceptional academic performance, while his research projects reflect a deep commitment to solving real-world healthcare challenges. His achievements in microfluidics and biosensor fabrication, along with his focus on cancer diagnosis, show his potential for meaningful contributions to biomedical engineering. Overall, his innovative research and dedication make him a deserving candidate for this prestigious award.

Publication Top Notes :

  • Optimization of Nanowell-Based Label-Free Impedance Biosensor Based on Different Nanowell Structures – Fardoost, A., Raji, H., Javanmard, M. (2024) 📅 Biosensors, 14(9), 426 | Cited by: 0
  • Intraoperative Assessment of High-Risk Thyroid Nodules Based on Electrical Impedance Measurements: A Feasibility Study – Beheshti Firoozabadi, J., Mahdavi, R., Shamsi, K., Akbari, M.E., Abdolahad, M., Fardoost, A. (2022) 📅 Diagnostics, 12(12), 2950 | Cited by: 0

GAMAL ABDELNASSER ALLAM ABOUZIED | Engineering | Best Researcher Award

Posted on by ScienceFather

Mr. GAMAL ABDELNASSER ALLAM ABOUZIED | Engineering | Best Researcher Award

Assistant Researcher, National Water Research Center, Egypt

Gamal Abdelnasser Allam Abouzied is a promising candidate for the Research for Best Researcher Award. He holds a PhD in Earthquake and Environmental Hazards from Università Degli Studi G. D’Annunzio Di Chieti-Pescara and has accumulated over eight years of research experience. His educational background includes a master’s degree from CIHEAM Bari and a bachelor’s degree in civil engineering from Cairo University. His deep-rooted commitment to advancing geospatial knowledge in civil engineering, water resources, and climate change makes him an exemplary candidate.

 

Publication Profile

orcid

Education Background 

Gamal Abdelnasser Allam Abouzied has a robust educational background in civil engineering and environmental hazards. He earned his Bachelor’s degree in Civil Engineering from Cairo University, followed by a Master’s in Land and Water Resources Management from the Mediterranean Agronomic Institute of Bari (CIHEAM). He further advanced his studies by completing a PhD in Earthquake and Environmental Hazards at Università Degli Studi G. D’Annunzio Di Chieti-Pescara. His education emphasizes sustainable practices in water resource management and climate resilience.

Professional Experiences

Currently, Gamal serves as a Technical Advisor at Planetek Italia Srl, where he plays a pivotal role in project planning and management. His responsibilities include ensuring project objectives are met and fostering collaboration between teams. Previously, as an Assistant Researcher at the National Water Research Center in Egypt, he planned and managed national research projects, focusing on irrigation and water resource management. His experience also extends to using simulation models and nontraditional water resources in agriculture, showcasing his expertise in practical applications of his research.

Research Contributions

Gamal’s research is characterized by significant contributions to the understanding of climate data and its implications for water resource management. His doctoral thesis focused on creating a comprehensive daily time series for Central Italy, addressing challenges in precipitation data that are crucial for effective climate change mitigation. His publications include studies on gap-filling methods for precipitation data, indicating his ability to develop innovative solutions to complex environmental issues.

Awards and Recognition

Gamal Abdelnasser Allam Abouzied has received recognition for his outstanding contributions to the fields of environmental hazards and water resource management. His work has been acknowledged at several international conferences, and his innovative research on climate data and water resources has earned him prestigious awards, including recognition from leading institutions such as CIHEAM Bari. Gamal’s expertise in remote sensing, simulation modeling, and geospatial data analysis has positioned him as a respected figure in his field, further enhancing his reputation among peers and collaborators worldwide.

Conclusion

Given his extensive academic qualifications, professional experience, and impactful research contributions, Gamal Abdelnasser Allam Abouzied stands out as a highly suitable candidate for the Research for Best Researcher Award. His dedication to advancing knowledge in environmental hazards and water resources, combined with his ability to collaborate effectively in multidisciplinary teams, makes him an ideal recipient of this prestigious award.

Publication Top Notes  

  1. Completion of the Central Italy daily precipitation instrumental data series from 1951 to 2019. Geoscience Data Journal (2024) 🌧️ DOI: 10.1002/gdj3.267
    Cited by: Guoqiang Tang, Simon Michael Papalexiou, Martyn P. Clark, Eleonora Aruffo, Piero Di Carlo
  2. Understanding future hydrologic challenges: Modelling the impact of climate change on river runoff in central Italy. Environmental Challenges (2024) 🌍 DOI: 10.1016/j.envc.2024.100899
    Cited by: Mohsin Tariq, A.N. Rohith, R. Cibin, Eleonora Aruffo, Piero Di Carlo
  3. Design of large-scale on-demand irrigation system in the agricultural area of Corato, Apulia, Italy. Agriculture and Forestry (2018) 🌱 DOI: 10.17707/agricultforest.64.4.11
    Cited by: Marija Markoc, Milica Colovic, Shawkat Basel, Qotada Al-Ali.

Ayalew Mekuria | Engineering | Excellence in Research

Posted on by ScienceFather

Ayalew Mekuria | Engineering | Excellence in Research

Mr Ayalew Mekuria, Dilla University, Ethiopia

Mr. Ayalew Mekuria appears to be a suitable candidate for the Research for Excellence in Research program. Here’s an assessment of his profile:

Publication profile

orcid

Education

  • MSc. in Chemical Engineering (Process Engineering) from Dire Dawa University (2020/2022)
  • BSc. in Chemical Engineering (Food Engineering) from Debre Berhan University (2014/2018)
  • HDP (Higher Diploma Program) from Dilla University (2018/2019)

Mr. Mekuria’s educational background in chemical engineering, particularly in process and food engineering, lays a strong foundation for his research capabilities. His master’s degree equips him with advanced knowledge and skills necessary for conducting high-quality research.

Work Experience

  • Lecturer at Dilla University (2018 – Current): His responsibilities include teaching, mentoring, and research advising, indicating strong communication and leadership skills. This role also allows him to stay current with academic research trends.
  • Training Facilitator at Dereja Academy: His role as a trainer in employability skills demonstrates his commitment to enhancing students’ practical skills and readiness for the job market. This experience shows his ability to engage with industry professionals, which is essential for research applications.
  • Internship Coordinator (2022 – 2024): This position requires excellent organizational skills and the ability to liaise with various stakeholders, including companies and students. Such experience is valuable in coordinating research projects and understanding industry needs.
  • Exam Review Committee and Exit Exam Coordinator (2022 – 2023): These responsibilities involve oversight of academic standards, further showcasing his leadership and evaluative skills, critical for maintaining research integrity.

Internship Experience

  • Internship at Habesha Brewery S.C. (Oct 2015 – Jan 2016): Practical experience in the brewery industry complements his academic knowledge, providing real-world insights into chemical engineering applications.

Certifications

Mr. Mekuria’s various certifications, including:

  • Dereja Academy Accelerator Program (DAAP)
  • Employability Skill and Job Readiness Training
  • Project Management Essentials
  • Certified Professional Teacher Educator

These certifications highlight his commitment to continuous learning and development, essential traits for a researcher.

Publications

  • Publication on the development, characterization, and optimization of sulfated fat liquor from fleshing tannery solid waste in Cogent Food & Agriculture (2024). This publication demonstrates his active engagement in research and contributes to the field of food engineering and sustainability.

Conclusion

Mr. Ayalew Mekuria’s educational background, extensive work experience, practical internships, and commitment to continuous professional development position him as a strong candidate for the Research for Excellence in Research program. His ability to integrate theoretical knowledge with practical applications, alongside his active participation in research and community service, underscores his potential to contribute significantly to the research community.

Mohammad Hejri | Engineering | Best Researcher Award

Posted on by ScienceFather

Dr. Mohammad Hejri | Engineering | Best Researcher Award

Associate Professor at Sahand University of Technology ,Iran

Dr. Mohammad Hejri is an Associate Professor in the Department of Electrical Engineering at Sahand University of Technology in Tabriz, Iran. He holds a Ph.D. in Electrical Engineering from Sharif University of Technology and the University of Cagliari, achieving a distinguished GPA of 17.37/20. Dr. Hejri has received numerous accolades, including the International Young Scientist Awards and recognition as the top candidate for a postdoctoral research position at KTH Royal Institute of Technology. His research focuses on the modeling and control of power electronics converters, reflected in his extensive publication record in reputable journals. Dr. Hejri has also contributed to academia through various teaching positions and reviewing activities for prestigious journals, showcasing his commitment to education and the advancement of electrical engineering.

Publication profile

Scopus Profile

Educational Background

Mohammad Hejri has a robust educational background in Electrical Engineering, highlighted by his double doctoral degree obtained from Sharif University of Technology in Tehran, Iran, and the University of Cagliari in Italy between 2005 and 2010. He achieved a commendable GPA of 17.37/20 for his Ph.D. studies, focusing on Hybrid Modeling and Control of Power Electronics Converters. Prior to his doctoral studies, he earned his Master’s degree in Electrical Engineering from Sharif University of Technology with an impressive GPA of 17.72/20. He completed his Bachelor’s degree in Electrical Engineering at Tabriz University, where he ranked 2nd among 140 students in his program with a GPA of 16.97/20. His academic excellence is further underscored by his top rankings in various entrance examinations throughout his educational journey.

Teaching and Research Experience

Mohammad Hejri is an accomplished academic with extensive teaching and research experience in Electrical Engineering. He has served as an Associate Professor at Sahand University of Technology since 2012, where he has taught undergraduate and graduate courses, including Electrical and Electronic Measurement, Optimization Fundamentals, and Power Electronics. Hejri has also been involved in curriculum development and has acted as a teaching assistant for various laboratory courses during his early career. His research, primarily focused on power electronics, control systems, and renewable energy integration, has resulted in numerous publications in prestigious journals and conference proceedings. Hejri’s dual Ph.D. in Electrical Engineering and Electronic and Computer Engineering reflects his commitment to advancing knowledge in his field, and his contributions have earned him recognition as a leading researcher. Additionally, he has engaged in various international research projects, further enhancing his expertise and fostering collaboration in the global scientific community.

Publication Top Notes

  • Title: Global Practical Stabilization of Discrete-time Switched Affine Systems: Application to Switching Power Converters
    Authors: Hejri, M.
    Year: 2021
    Citations: 3
  • Title: Global Practical Stabilization of Discrete-time Switched Affine Systems via Switched Lyapunov Functions and State-Dependent Switching Functions
    Authors: Hejri, M.
    Year: 2021
    Citations: 3
  • Title: Correction to ‘Global Practical Stabilization of Discrete-time Switched Affine Systems via a General Quadratic Lyapunov Function and a Decentralized Ellipsoid’
    Authors: Hejri, M.
    Year: 2022
    Citations: 2
  • Title: On the Well-Posedness, Equivalency, and Low-Complexity Translation Techniques of Discrete-time Hybrid Automaton and Piecewise Affine Systems
    Authors: Hejri, M., Mokhtari, H.
    Year: 2022
    Citations: 1
  • Title: Cascade Control System Design and Stability Analysis for a DC–DC Boost Converter with Proportional Integral and Sliding Mode Controllers and Using Singular Perturbation Theory
    Authors: Azarastemal, S., Hejri, M.
    Year: 2021
    Citations: 8

Conclusion

Mohammad Hejri is a highly qualified candidate for the Best Researcher Award, demonstrating exceptional academic performance, significant research contributions, and a commitment to teaching and mentorship. His recognition in the academic community, coupled with his extensive publication record, highlights his impact in the field of electrical engineering, particularly in power electronics and control systems.