Sina Shakeri | Engineering | Young Scientist Award

Published on 18/08/2026 by Global Academic Awards

Young Scientist Award

Sina Shakeri
Affiliation	Flinders University
Country	Australia
Scholar ID	h3L9AzwAAAAJ
Documents	22
Citations	197
h-index	8
Subject Area	Engineering
Event	Global Academic Awards

Sina Shakeri is an engineering researcher affiliated with Flinders University, Australia. The supplied scholarly profile identifies 22 documents, 197 citations, and an h-index of 8. These indicators provide a quantitative overview of the researcher’s documented scholarly output and citation activity and are considered in this article as part of an academic recognition profile. [1]

This article presents a neutral academic overview of Sina Shakeri in relation to the Young Scientist Award associated with the Global Academic Awards. The assessment focuses on research profile, scholarly contributions, publication activity, research impact, and general suitability for recognition rather than asserting an award outcome not established by the supplied information.

Contents

Abstract
Keywords
Introduction
Research Profile
Research Contributions
Publications
Research Impact
Award Suitability
Conclusion
External Links
References

Abstract

The Young Scientist Award profile for Sina Shakeri examines an engineering researcher affiliated with Flinders University in Australia. Based on the supplied scholarly profile information, Shakeri has 22 documented publications or scholarly documents, 197 citations, and an h-index of 8. [1] These indicators provide a concise representation of research productivity and citation visibility. The profile is considered in the context of academic recognition, with emphasis on documented scholarly activity, publication development, research influence, and potential contribution to engineering research.

Keywords

Sina Shakeri
Young Scientist Award
Engineering research
Flinders University
Academic recognition
Research impact
Scholarly publications
Global Academic Awards

Introduction

Young scientist recognition programs generally seek to identify researchers whose scholarly activities demonstrate developing expertise, sustained research engagement, and meaningful contributions to their disciplines. Within engineering, such recognition may consider publication records, research originality, methodological contribution, collaboration, and evidence of scholarly influence.

Sina Shakeri is associated with Flinders University in Australia and is identified in the supplied information as an engineering researcher. The available Google Scholar profile information records 22 documents, 197 citations, and an h-index of 8. [1] Because citation indicators can change over time, these figures should be understood as profile data supplied for this article rather than permanent bibliometric values.

Research Profile

The available profile identifies engineering as the researcher’s principal subject area. The combination of documented scholarly documents and citations indicates an established publication record with measurable academic visibility. The h-index of 8 indicates that at least eight indexed scholarly works in the supplied profile have received at least eight citations each, assuming the profile statistics are calculated according to the conventional h-index definition.

The institutional affiliation with Flinders University places the research profile within an established Australian university research environment. Institutional affiliation alone does not determine research quality; rather, it provides contextual information for interpreting a researcher’s scholarly activities and collaborations. [2]

Research Contributions

The available data support the characterization of Shakeri as an active engineering researcher with a documented body of scholarly work. The research contribution profile may be evaluated through several complementary dimensions:

Scholarly productivity: The supplied profile records 22 documents, providing evidence of sustained academic publication activity. [1]
Citation visibility: A reported 197 citations indicate that the researcher’s publications have received measurable attention within the scholarly literature represented by the profile. [1]
Research continuity: The number of documented works provides an indication of continued engagement with research and publication.
Engineering relevance: The supplied subject classification places the researcher’s scholarly activity within engineering, a broad field encompassing technological, methodological, and applied research.
Academic development: The combination of publication output and citation activity can serve as one component of evaluating an emerging or developing scientific career.

A complete assessment of individual contributions would require examination of the underlying publications, authorship roles, venues, methodological innovations, datasets, patents where applicable, and documented practical or societal applications. Those details are not supplied in the input data and therefore are not inferred here.

Publications

The supplied scholarly profile reports 22 documents associated with Sina Shakeri. [1] The available information does not provide a complete publication-by-publication bibliography, publication titles, journal names, publication years, authorship positions, or DOI identifiers. Accordingly, individual publications and DOI records are not reproduced or inferred in this article.

For an authoritative and current publication list, readers should consult the researcher’s linked scholarly profile. Bibliometric information should be interpreted with awareness that citation counts, document totals, and h-index values may change as databases are updated and additional publications or citations are indexed.

Research Impact

Research impact can be assessed through both quantitative and qualitative evidence. The reported 197 citations provide one quantitative indicator of scholarly visibility, while the h-index of 8 provides an additional measure of the distribution of citations across the researcher’s publications. [1] Neither measure, considered independently, establishes the originality, societal value, methodological quality, or practical significance of research.

For a comprehensive evaluation, citation indicators may be considered alongside peer-reviewed publication quality, research originality, collaboration, interdisciplinary relevance, technological or industrial application, conference contributions, research funding, mentoring, and other documented forms of academic service. Such evidence would allow a broader assessment of the researcher’s influence within engineering and related research communities.

Award Suitability

The supplied profile presents several characteristics that may be relevant when considering suitability for a Young Scientist Award, including an identifiable engineering research focus, a documented publication record, and measurable citation activity. The profile records 22 documents, 197 citations, and an h-index of 8. [1]

Potential evaluation areas for an academic recognition process may include:

Quality and relevance of peer-reviewed research.
Originality and methodological strength of research contributions.
Consistency and development of the publication record.
Scholarly influence as reflected by appropriate citation and research-use indicators.
Contribution to engineering knowledge, technology, or application.
Evidence of collaboration, interdisciplinary activity, or broader academic engagement.
Alignment of documented achievements with the applicable award criteria.

On the basis of the information supplied, Shakeri has a documented academic profile that can reasonably be reviewed for young-researcher recognition. Final eligibility, nomination status, judging, and award outcomes remain subject to the official rules and evaluation procedures of the Global Academic Awards.

Conclusion

Sina Shakeri is an engineering researcher affiliated with Flinders University, Australia, with a supplied scholarly profile reporting 22 documents, 197 citations, and an h-index of 8. [1] These indicators demonstrate a measurable record of scholarly publication and citation activity. In the context of the Young Scientist Award, the profile provides a basis for academic review, while a complete assessment should additionally consider the quality, originality, significance, and broader impact of the underlying research.

The information presented here is intended as a structured academic recognition profile. It does not independently certify an award result, ranking, or formal endorsement and should be read together with the applicable criteria and official information published by the Global Academic Awards.

External Links

References

Google Scholar. (n.d.). Author profile: Sina Shakeri, Scholar ID h3L9AzwAAAAJ. Google Scholar. https://scholar.google.com/citations?user=h3L9AzwAAAAJ&hl=en
Flinders University. (n.d.). Flinders University research and academic information. Flinders University.
Global Academic Awards. (n.d.). Global Academic Awards. Official award website. https://academicawards.sciencefather.com/

Yuh-Ming Ferng | Engineering | Best Researcher Award

Published on 18/09/202518/09/2025 by Global Academic Awards

Prof. Yuh-Ming Ferng | Engineering | Best Researcher Award

National Tsing Hua University | Taiwan

Prof. Yuh-Ming Ferng, a distinguished Professor at the Department of Engineering and System Science, Institute of Nuclear Engineering and Science, National Tsing Hua University (NTHU), has made significant contributions to nuclear engineering through his extensive research and academic leadership. He earned his B.S. and Ph.D. in Nuclear Engineering from NTHU, where his doctoral thesis focused on the numerical simulation of the rewetting process. With a professional career spanning over three decades, Prof. Yuh-Ming Ferng has held roles as Assistant, Associate, and Full Professor at NTHU, alongside senior research positions at its Nuclear Science and Technology Development Center and the Center for Energy and Environmental Research, as well as the Institute of Nuclear Energy Research. His research expertise covers nuclear reactor safety, severe accident analysis, CFD turbulence modeling, two-phase flow, thermal management, fuel cell simulation, and renewable energy systems. With 2,470 citations, 168 documents, and an h-index of 30, he is a highly impactful researcher in his field.

Profile: Scopus

Featured Publications

Ferng, Y.-M., & co-authors. (2026). Determining minimum site area for deep geological repository of spent fuels using thermal simulations. Annals of Nuclear Energy. Advance online publication.
Ferng, Y.-M., & co-authors. (2025). Thermal management design for the Be target of an accelerator-based boron neutron capture therapy system using numerical simulations with boiling heat transfer models. Processes. Advance online publication.
Ferng, Y.-M., & co-authors. (2024). Development of thermal-hydraulic coupling model for deep-geological disposal of high-level radioactive wastes. Nuclear Engineering and Design.
Ferng, Y.-M., & co-authors. (2024). Numerical model for noise reduction of small vertical-axis wind turbines. Wind Energy Science.
Ferng, Y.-M., & co-authors. (2024). Numerical prediction of the aerodynamics and aeroacoustics of a 25 kW horizontal axis wind turbine. Journal of Mechanics.

Jungsoo Nam | Engineering | Best Researcher Award

Published on 20/08/2025 by Global Academic Awards

Dr. Jungsoo Nam | Engineering | Best Researcher Award

Dr. Jungsoo Nam | Korea Institute of Industrial Technology | South Korea

Dr. Jungsoo Nam is a distinguished researcher in mechanical engineering, specializing in advanced manufacturing, precision machining, and nanotechnology applications. He earned his Ph.D. in Mechanical Engineering from Sungkyunkwan University, focusing on micro-drilling processes using nanofluids, after completing his undergraduate studies in Mechanical System and Design Engineering at Seoul National University of Science and Technology. Currently serving as Principal Researcher at the Korea Institute of Industrial Technology (KITECH), he has led pioneering projects in hybrid 3D printing, cryogenic machining, additive manufacturing, and carbon fiber reinforced plastics machining. His international research exposure includes a tenure as a Research Scholar at Purdue University, where he contributed to innovative developments in atomization-based spray coating and sensor fusion systems. Recognized with numerous prestigious honors such as the Young Researcher Award at PRESM, KITECH Best Researcher Award, and multiple best paper awards from leading engineering societies, Dr. NamDr. Jungsoo Nam has established himself as a leader in precision engineering and smart manufacturing technologies.

Publication Profile

Scopus

Google Scholar

Educational Background

Dr. Jungsoo Nam pursued his academic journey in the field of mechanical engineering with a strong focus on advanced manufacturing processes and nanotechnology applications. He earned his Bachelor of Science in Mechanical System and Design Engineering from Seoul National University of Science and Technology in Seoul, Korea, where he laid the foundation for his expertise in precision engineering and system design. Building on this foundation, he advanced to graduate studies at Sungkyunkwan University in Suwon, Korea, where he successfully completed his doctoral degree in Mechanical Engineering. Under the mentorship of Dr. Sang Won Lee, his doctoral dissertation was titled “A Study on Characterization and Monitoring for Micro-Drilling Process Using Nanofluids,” reflecting his early commitment to pioneering research in machining processes and process monitoring. His academic background highlights a blend of strong theoretical knowledge and applied research, establishing a solid platform for his distinguished career in engineering innovation.

Honors and Awards

Dr. Jungsoo Nam has been widely recognized for his outstanding contributions to mechanical engineering and precision manufacturing through numerous prestigious honors and awards. His achievements include the Young Researcher Award at PRESM, multiple Best Paper Awards from the Korean Society for Precision Engineering, and the Korean Society of Mechanical Engineers Best Paper Award. At the Korea Institute of Industrial Technology, he was honored with both the Best Researcher Award and the President Award, reflecting his leadership and excellence in applied research. He has also received the KSPE Young Engineer Award, the Kistler Korea Technology Award, and the NAMRC Outstanding Paper recognition, further establishing his influence in the global research community. Early in his career, he earned the Graduate School Award for his dissertation with highest honors and was recognized for highly cited journal articles, including awards from the International Journal of Precision Engineering and Manufacturing. These accolades collectively highlight his innovation, impact, and sustained excellence in engineering research.

Research and Work Experience

Dr. Jungsoo Nam has built an extensive research and professional career in the field of mechanical engineering with a focus on advanced manufacturing, precision machining, and smart technologies. He has been serving as Principal Researcher at the Korea Institute of Industrial Technology, where he has led projects on hybrid 3D printing, cryogenic machining, high productivity turning centers, and machining systems for carbon fiber reinforced plastics with innovative monitoring technologies. His international research exposure includes his tenure as a Research Scholar at Purdue University, where he contributed to atomization-based spray coating, sensor fusion, and development of advanced manufacturing systems. Prior to this, he worked as a Postdoctoral Research Associate at Sungkyunkwan University, advancing IoT-based machine tool prognostics and smart factory integration with cyber-physical systems. His early career as a Graduate Student Research Assistant involved groundbreaking work on environmentally friendly micromachining, nanofluid applications, and cryogenic machining technologies. Additionally, he served in the Republic of Korea Marine Corps, demonstrating discipline and leadership that continue to complement his research endeavors.

Research Focus

Dr. Jungsoo Nam’s research focus lies primarily in the fields of precision machining, advanced manufacturing processes, and sustainable engineering technologies. His work emphasizes micro-drilling, micro-grinding, and milling of difficult-to-machine materials such as titanium alloys and carbon fiber reinforced plastics, where he has pioneered the application of nanofluid minimum quantity lubrication to enhance machining efficiency and environmental sustainability. He has also contributed significantly to the integration of artificial intelligence, machine learning, and health monitoring systems in additive manufacturing and smart factory environments, enabling predictive diagnostics and real-time process optimization. His studies often address critical challenges in aerospace, automotive, and semiconductor applications, particularly through the development of environmentally friendly machining processes using nanodiamond particles, nano-solid lubricants, and cryogenic cooling. By bridging traditional machining with emerging smart technologies, Dr. Nam has established himself as a leader in sustainable precision engineering, ensuring high-quality manufacturing performance while reducing environmental impact and improving industrial competitiveness.

Publication Top Notes

Experimental characterization of micro-drilling process using nanofluid minimum quantity lubrication
Year: 2011
Citations: 310

An experimental study on micro-grinding process with nanofluid minimum quantity lubrication (MQL)
Year: 2012
Citations: 286

Environmentally-friendly nano-fluid minimum quantity lubrication (MQL) meso-scale grinding process using nano-diamond particles
Year: 2010
Citations: 90

Optimization of environmentally benign micro-drilling process with nanofluid minimum quantity lubrication using response surface methodology and genetic algorithm
Year: 2015
Citations: 81

Machinability of titanium alloy (Ti-6Al-4V) in environmentally-friendly micro-drilling process with nanofluid minimum quantity lubrication using nanodiamond particles
Year: 2018
Citations: 76

Conclusion

Dr. Jungsoo Nam is a highly suitable candidate for the Research for Best Researcher Award. His consistent track record of impactful publications, innovative research contributions, and prestigious honors demonstrates excellence and leadership in his field. With minor improvements in global engagement, his potential for long-term influence remains exceptional.

Hakan Yaykaşlı | Engineering | Best Researcher Award

Published on 18/08/2025 by Global Academic Awards

Assist. Prof. Dr. Hakan Yaykaşlı | Engineering | Best Researcher Award

Assist. Prof. Dr. Hakan Yaykaşlı | Kahramanmaraş İstiklal University | Turkey

Assist. Prof. Dr. Hakan Yaykaşlı is an accomplished academic specializing in materials science, mechanical engineering, and physics, with a distinguished background in advanced alloys, nanofillers, and composite materials. He holds dual doctoral degrees, one in Mechanical Engineering from Gaziantep University with a focus on nanofillers in hybrid fiber composites, and another in Materials Science and Engineering from Kahramanmaraş Sütçü Imam University, where he studied the structural and mechanical properties of advanced light alloys. He also earned a master’s degree in Physics, exploring the electrical and optical properties of boron-doped thin films, and several bachelor’s degrees in physics, mechanical engineering, and occupational health and safety, along with associate degrees in machinery and emergency disaster management. His academic career includes roles as Specialist, Lecturer, and currently Assistant Professor at Kahramanmaraş İstiklal University. Dr. Yaykaşlı has supervised numerous theses on advanced alloys, nanostructured coatings, and innovative materials, while contributing significantly to teaching, mentorship, and applied research in his field.

Publication Profile

Scopus

Google Scholar

Academic and Professional Journey

Assist. Prof. Dr. Hakan Yaykaşlı is a distinguished scholar with a strong academic background in physics, mechanical engineering, and materials science, reflected through his extensive education and research contributions. He earned a PhD in Mechanical Engineering from Gaziantep University with a thesis on the influence of nanofillers on the fracture and interlaminar shear properties of basalt carbon hybrid fiber reinforced composites, and another PhD in Materials Science and Engineering from Kahramanmaraş Sütçü Imam University, focusing on the structural, thermal, and mechanical properties of advanced AlMgTiB light alloys. His academic journey began with a master’s degree in Physics, where he investigated the electrical and optical properties of boron-doped thin films. He also completed bachelor’s studies in physics, mechanical engineering, and occupational health and safety, along with associate degrees in machinery and emergency disaster management, reflecting his interdisciplinary expertise. Through his academic endeavors, Dr. Yaykaşlı has cultivated a deep understanding of advanced materials, mechanical systems, and applied research, making significant contributions to engineering and science.

Awards and Recognition

Assist. Prof. Dr. Hakan Yaykaşlı has been recognized for his academic contributions and research achievements through prestigious honors that highlight his dedication to advancing science and engineering. Among his notable recognitions is the Publication Incentive Award granted by TÜBİTAK, a highly regarded acknowledgment in Turkey that supports and encourages impactful scientific publications. This award reflects his commitment to producing high-quality research and contributing to the dissemination of knowledge in the fields of mechanical engineering, materials science, and physics. Such recognition not only underlines the academic value of his published works but also demonstrates his ability to align his research with national and international standards of excellence. The award serves as an important milestone in his career, motivating him to further expand his scientific output and continue guiding new research in advanced materials, nanotechnology, and composite structures while inspiring students and colleagues in his field.

Research Focus

Assist. Prof. Dr. Hakan Yaykaşlı’s research focus lies at the intersection of materials science, nanotechnology, and mechanical engineering, with a strong emphasis on the development and characterization of advanced functional materials. His studies explore the mechanical, structural, thermal, optical, and radiation shielding properties of alloys, composites, glasses, and nanomaterials, particularly high entropy alloys, borate and barium-based glasses, and polymer nanocomposites. He has contributed significantly to the field of nanostructured coatings, thin films, and hybrid fiber composites by investigating the role of nanofillers, dopants, and processing techniques on enhancing mechanical strength, fracture resistance, and multifunctional properties. A key area of his expertise is radiation shielding, where he develops innovative glass and alloy systems designed to provide effective protection while maintaining structural integrity. His interdisciplinary approach integrates experimental methods with advanced characterization techniques, contributing to applications in nuclear energy, electronics, aerospace, additive manufacturing, and sustainable engineering materials.

Publication Top Notes

Mechanical and dynamic properties of basalt fiber-reinforced composites with nanoclay particles
Year: 2020 | Citations: 76

Microstructural, thermal, and radiation shielding properties of Al50B25Mg25 alloy prepared by mechanical alloying
Year: 2022 | Citations: 54

Investigation of structural, morphological, mechanical, thermal and optical properties of PVA-ZnO nanocomposites
Year: 2021 | Citations: 35

Investigation of the properties of In doped NiO films
Year: 2014 | Citations: 34

Investigating the PVA/TiO2/CDs polymer nanocomposites: effect of carbon dots for photocatalytic degradation of Rhodamine B
Year: 2022 | Citations: 30

Conclusion

Assist. Prof. Dr. Hakan Yaykaşlı is a strong candidate for the Research for Best Researcher Award. His academic diversity, dual doctoral achievements, and contributions to materials science and mechanical engineering underline his significant role in advancing research. With increased international visibility and expanded research collaborations, he has the potential not only to compete strongly but also to emerge as a leading figure in his discipline, making him a suitable nominee for this recognition.

Mohammad Neshati | Electrical Engineering | Best Researcher Award

Published on 28/04/202528/04/2025 by Global Academic Awards

Assoc. Prof. Dr . Mohammad Neshati | Electrical Engineering | Best Researcher Award

Assoc. Prof. Dr . Mohammad Neshati, Ferdowsi University of Mashhad, Iran

Dr. Mohammad Hassan Neshati is an Associate Professor in the Department of Electrical Engineering and Electronics at Ferdowsi University of Mashhad, Iran. Born in Yazd in 1959, he specializes in microelectronics, microwave engineering, and antenna design. With over two decades of academic and research experience, Dr. Neshati has been a reviewer and editorial board member for esteemed journals such as IEEE-AP and the International Journal of Antennas and Propagation. A senior IEEE member, he has supervised numerous MSc and PhD students. Dr. Neshati is fluent in English and Persian, contributing significantly to advancements in dielectric resonator antenna technologies.

Publication Profile

Orcid

Education

Dr. Neshati earned his PhD in Electrical Engineering from UMIST (University of Manchester Institute of Science and Technology), UK, where he specialized in numerical modeling and application studies of rectangular dielectric resonator antennas. Before that, he obtained his MSc in Electronics from Amir-Kabir University of Technology, Tehran, focusing on telemetry and radio frequency circuit design. His academic journey began with a BS degree in Electrical Engineering from Isfahan University of Technology, Iran. Throughout his education, Dr. Neshati demonstrated exceptional academic performance, earning scholarships and accolades for his research contributions.

Experience

Dr. Neshati has extensive teaching and research experience, beginning as an Instructor at Sistan & Baluchistan University (1989–1996), later becoming an Assistant Professor there until 2007. He then joined Ferdowsi University of Mashhad, progressing from Assistant Professor (2007–2008) to Associate Professor (2008–present). Dr. Neshati serves on editorial boards of several international journals and is a reviewer for IEEE journals. He has also mentored numerous MSc and PhD students, contributing significantly to academic research and engineering education. His expertise covers microelectronics, microwave devices, antennas, and network analyzers, supported by advanced proficiency in simulation tools like MATLAB, HFSS, and ADS.

Awards and Honors

Dr. Neshati has been a Senior Member of IEEE since 2013 and a regular member since 2000. He was awarded a prestigious scholarship to pursue his PhD studies at UMIST, where he was recognized as a top selected PhD student during 2000–2001. His academic excellence, leadership in research, and significant contributions to the fields of microwave engineering and antenna design have earned him notable distinctions. In addition, his editorial roles in prominent journals further highlight his standing in the scientific community. Dr. Neshati’s awards underscore his commitment to advancing research and fostering academic excellence in electrical engineering.

Research Focus

Dr. Neshati’s research centers around microelectronics, microwave engineering, and advanced antenna systems, particularly focusing on rectangular dielectric resonator antennas (RDRAs). His PhD work combined theoretical modeling, numerical simulation using FEM, and experimental validation of RDRAs. Key areas of investigation include resonance frequency optimization, radiation patterns, Q-factor, impedance bandwidth, and coupling mechanisms. His studies explore various feed structures like probe-fed and microstrip-coupled systems, addressing practical challenges such as fabrication imperfections. Dr. Neshati’s current research extends to dual-band antennas, backward radiation reduction, and dielectric resonator applications, contributing innovations in wireless communication and RF systems design.

Publication Top Notes

Development of a Compact Microstrip Antenna Using Slow-Wave Artificial Dielectric Substrate – Microwave and Optical Technology Letters (2025) 📡, DOI: 10.1002/mop.70191
Textile-based high-gain bow-tie antenna using metamaterials for medical applications – Engineering Reports (2024) 🏥, DOI: 10.1002/eng2.12949
Efficient Design Procedure for Combline Bandpass Filters With Advanced Electrical Responses – IEEE Access (2023) 🔧, DOI: 10.1109/ACCESS.2023.3278791
Equivalent Circuit Modeling of a Transmission Mode FSS Structure with Anisotropic Substrate and Enhanced Parameters – Iranian Journal of Science and Technology, Transactions of Electrical Engineering (2022) 🔬, DOI: 10.1007/s40998-022-00489-2
Development of a New Method for Pattern Synthesizing of Linear and Planar Arrays Using Legendre Transform With Minimum Number of Elements – IEEE Transactions on Antennas and Propagation (2022) 📡, DOI: 10.1109/TAP.2021.3137200
A new noniterative method for pattern synthesis of unequally spaced linear arrays – International Journal of RF and Microwave Computer-Aided Engineering (2019) 🔧, DOI: 10.1002/mmce.21921
Crosstalk analysis of uniform and nonuniform lossy microstrip‐coupled transmission lines – International Journal of RF and Microwave Computer-Aided Engineering (2019) ⚡, DOI: 10.1002/mmce.21916
Crosstalk analysis of multi‐microstrip coupled lines using transmission line modeling – International Journal of RF and Microwave Computer-Aided Engineering (2019) ⚡, DOI: 10.1002/mmce.21677
Design and Development of High-Gain SIW H-Plane Horn Antenna Loaded With Waveguide, Dipole Array, and Reflector Nails Using Thin Substrate – IEEE Transactions on Antennas and Propagation (2019) 📡, DOI: 10.1109/TAP.2019.2896445
Input impedance modeling of patch and semi-rectangular substrate integrated waveguide cavity hybrid antenna – AEU – International Journal of Electronics and Communications (2018) 🔧, DOI: 10.1016/j.aeue.2018.03.013

Bilal Elhajjar | Engineering | Industry Impact Academic Award

Published on 25/03/202525/03/2025 by Global Academic Awards

Dr. Bilal Elhajjar | Engineering | Industry Impact Academic Award

Process Engineering & Development Manager at United Steel Industrial Co, Kuwait

Dr. Bilal Elhajjar is a seasoned engineering professional and academic with over 18 years of experience in the steel and energy industries. He specializes in process engineering, logistics optimization, hydrogen management, and supply chain strategies. As the Process Engineering, Development, and Logistics Manager at KWTSTEEL, he has led over 1000 projects, including steel plant revamps, cost reduction initiatives, and feasibility studies. His expertise spans project management, industrial research, and technical leadership, saving his company approximately $1 million annually through optimized logistics. Academically, he holds a PhD in Fluid Mechanics and has contributed to cutting-edge research in nanofluidics, heat transfer, and industrial process modeling, with multiple high-impact publications. Previously, he served as an Assistant Professor and postdoctoral researcher, bridging academia and industry. His multidisciplinary knowledge and leadership in both industrial and academic settings make him a distinguished figure in engineering and applied research.

Professional Profile

ORCID Profile

Education 🎓

Dr. Bilal Elhajjar holds a PhD in Fluid Mechanics and Heat and Mass Transfer from the University of Toulouse, where he graduated with the highest honors. He also earned a MicroMaster in Supply Chain Management from the Massachusetts Institute of Technology (MIT) in 2022. His academic journey includes a Master’s degree in Fluid Dynamics and Heat Transfer from the University of Toulouse, where he was the valedictorian, and a Bachelor’s degree in Engineering from the Lebanese University, also graduating as valedictorian. He has further specialized in renewable energy, earning Galileo Master Certificates in Hydrogen Energy and Renewable Energy Management & Finance from the Renewable Energy Institute. Additionally, he is a certified Hydrogen Energy Consultant Expert. Dr. Elhajjar has continuously enhanced his expertise through certifications in contract law (Harvard University), project management, and advanced quality techniques, equipping him with a strong foundation in both engineering and business management.

Experience 🌟

Dr. Bilal Elhajjar has over 18 years of professional experience spanning the steel, energy, and academic sectors. Since 2012, he has served as the Process Engineering, Development, and Logistics Manager at KWTSTEEL, where he has led over 1000 projects, optimizing supply chain operations, reducing costs, and enhancing plant efficiency. His expertise includes feasibility studies, process control, and commissioning steel plants and equipment. Prior to this, he was an Assistant Professor at the University of Evry Val d’Essonne, where he developed engineering courses and collaborated with industries on applied research projects. He also worked as a postdoctoral researcher at the University of Toulouse, contributing to nanofluidics and heat transfer studies. His career includes research stints at the University of Calgary and collaborations with Airbus and Gaztransport. With a strong blend of industrial leadership and academic research, Dr. Elhajjar has significantly contributed to engineering advancements and operational excellence.

Research Interests 🔬

Dr. Bilal Elhajjar’s research interests span fluid mechanics, heat and mass transfer, nanofluidics, hydrogen energy, and industrial process optimization. His work focuses on enhancing efficiency in energy-intensive industries, particularly in steel manufacturing and hydrogen management. He has conducted extensive research on heat transfer modeling, separation of fluid mixtures, and the application of nanotechnology to improve thermal properties of fluids. His studies on Soret-driven convection and thermo-gravitational separation have contributed to advancements in porous media research. Additionally, he has explored hydrogen energy applications, sustainable industrial practices, and supply chain optimization. His research bridges academia and industry, applying scientific principles to real-world engineering challenges, including logistics efficiency and cost reduction in manufacturing. With numerous high-impact publications, Dr. Elhajjar continues to advance knowledge in energy systems, process engineering, and sustainable industrial solutions, making significant contributions to both theoretical research and practical industry applications.

Awards 🏆

Dr. Bilal Elhajjar has been recognized for his outstanding contributions to engineering, research, and industrial process optimization. He graduated as the valedictorian in both his Bachelor’s and Master’s degrees, reflecting his academic excellence. His PhD in Fluid Mechanics from the University of Toulouse was awarded with the highest honors, acknowledging his pioneering research in heat transfer and fluid dynamics. Throughout his career, he has received various professional certifications and recognitions, including Galileo Master Certificates in Hydrogen Energy and Renewable Energy Management & Finance from the Renewable Energy Institute. His innovations in steel manufacturing and logistics optimization, which saved approximately $1 million annually, have positioned him as a leader in industrial process improvement. Additionally, he has been a visiting researcher at the University of Calgary and has collaborated with global organizations like Airbus and Gaztransport. His contributions continue to earn him recognition in both academic and industrial circles.

Research Skill 🔍

Dr. Bilal Elhajjar possesses exceptional research skills in fluid mechanics, heat and mass transfer, nanofluidics, hydrogen energy, and industrial process optimization. He excels in numerical modeling, computational simulations, and experimental analysis, applying advanced methodologies to solve complex engineering challenges. His expertise includes finite element analysis, thermal modeling, and process simulation, which he has utilized in industrial research and academic studies. He has conducted groundbreaking research on Soret-driven convection, thermo-gravitational separation, and nanotechnology applications in heat transfer, leading to multiple high-impact publications. Dr. Elhajjar is adept at conducting feasibility studies, analyzing industrial processes, and optimizing supply chains, integrating research-driven strategies to enhance operational efficiency. His ability to bridge theoretical research with practical industry applications makes him a valuable contributor to both academia and engineering fields. With strong analytical, problem-solving, and technical writing skills, he continues to innovate in energy management, sustainable manufacturing, and process improvement.

Conclusion

Dr. Bilal Elhajjar is a strong candidate for the Industry Impact Academic Award due to his extensive industrial expertise, leadership in engineering projects, and research contributions. His ability to bridge academia and industry is commendable, especially in process optimization, logistics, and hydrogen management. Strengthening the direct link between research and industry-wide impact could further enhance his application. Overall, his credentials align well with the award’s objectives.

Top Noted Publications 📚

Author(s): Bilal Elhajjar, Mohamed Samir Larhrib, Davide Mombelli
Year: 2025
Title: Consequences of Switching From Lime to Dololime Fines Injection in Electric Arc Furnace
Journal: Engineering Reports
DOI: 10.1002/eng2.70095
Type: Journal Article
Publication Date: March 2025

Israa Dheyaa Khalaf Al-Rubaye | Engineering | Best Researcher Award

Published on 04/01/202504/01/2025 by Global Academic Awards

Ms. Israa Dheyaa Khalaf Al-Rubaye | Engineering | Best Researcher Award

Ms. Israa Dheyaa Khalaf Al-Rubaye, University of Pisa, Italy

🎓 Ms. Israa Dheyaa Khalaf Al-Rubaye is a PhD candidate in Smart Industry at the University of Pisa, Italy (2022–2024), specializing in Electrical Discharge Machining (EDM) and green energy technologies. She has expertise in innovative electrode design, cryogenic treatment, and biodiesel-based dielectric fluids to optimize machining processes for precision, energy efficiency, and sustainability. With a Master’s in Industrial-Mechanical Engineering from the University of Technology, Baghdad, she collaborates with leading institutions like CNR and NANESA. 🛠️ Her published research focuses on green EDM, advanced materials, and process optimization. Ms. Al-Rubaye is fluent in Arabic and English. 🌍

Publication Profile

Orcid

🎓 Education Qualifications

Ms. Israa Dheyaa Khalaf Al-Rubaye is currently a PhD candidate in the Smart Industry program at the University of Pisa, Italy, where she has been specializing in advanced manufacturing and sustainable technologies since 2022. Her doctoral research focuses on Electrical Discharge Machining (EDM) and green energy applications, demonstrating her commitment to innovation and environmental impact reduction. 🌍 Prior to this, she earned her Master’s degree in Industrial-Mechanical Engineering from the University of Technology, Baghdad, Iraq (2012–2016), gaining a strong foundation in mechanical systems and industrial process optimization. 🛠️

💼 Work Experience and Profession

Ms. Israa Dheyaa Khalaf Al-Rubaye has extensive experience in both academic and industrial settings. Since January 2022, she has been a Ph.D. candidate in the Smart Industry Department at the University of Pisa, Italy, where she conducts cutting-edge research in Electrical Discharge Machining (EDM) and green energy technologies. 🌱 She has collaborated with CNR and NANESA institutions, contributed to the development of green dielectric fluids, and designed innovative EDM electrodes. Prior to her Ph.D., she worked as a Planning and Follow-up Engineer at the Company for Land Transportation, Iraq, where she supported strategic planning and project coordination. 🚗

🔬 Research Focus

Ms. Israa Dheyaa Khalaf Al-Rubaye’s research primarily focuses on Electrical Discharge Machining (EDM), with an emphasis on optimizing die-sinking EDM processes and improving machining performance through innovative electrode designs, such as her work on U-shaped electrodes. Her research also explores green energy technologies, specifically the use of eco-friendly dielectric fluids to reduce environmental impact in industrial processes. 🌱 She investigates cutting-edge materials, including the integration of graphene coatings and biodiesel-based dielectric fluids, to enhance energy efficiency and machining precision. Her work contributes to advancing sustainable manufacturing practices and innovative machining technologies. ⚙️

📚 Publications

“Effect of manufacturing new U-shaped electrode on die sinking EDM process performance” – Machining Science and Technology, Nov 2024. DOI: 10.1080/10910344.2024.2414263 ⚙️
“Toward green electrical discharge machining (EDM): state of art and outlook” – Machining Science and Technology, Jan 2023. DOI: 10.1080/10910344.2023.2194961 🌱

BURAK AKIN | Engineering | Best Researcher Award

Published on 24/12/202424/12/2024 by Global Academic Awards

BURAK AKIN | Engineering | Best Researcher Award

Assist. Prof. Dr BURAK AKIN, YTU, Turkey

Assist. Prof. Dr. Burak Akın is an academician at Yıldız Technical University, specializing in Electrical and Electronics Engineering. He holds a doctorate from Yıldız Technical University (2001-2008) and has extensive research in energy, renewable energy, and engineering technology. He has been an Assistant Professor since 2013, also holding roles such as Deputy Head of the Department and Commission Chair. Dr. Akın advises postgraduate and doctoral students, with research published in SCI journals. His academic contributions extend to organizing national and international scientific events and refereeing for journals. His expertise includes power systems, battery management, and optimization algorithms. ⚡📚🔋

Publication Profile

Scopus

Education & Career

Assist. Prof. Dr. Burak Akın is an accomplished expert in Electrical and Electronics Engineering with a Doctorate from Yıldız Technical University, Turkey. With over two decades of academic experience, he began his career as a research assistant and progressively advanced to his current role as an assistant professor. Dr. Akın is dedicated to research and education in his field, contributing significantly to advancements in Electrical and Electronics Engineering. Currently serving at Yıldız Technical University, he continues to inspire and mentor students while driving forward innovative research. 🔬📚💡🎓

Academic & Administrative Roles

Dr. Akın is a dedicated academic leader at Yıldız Technical University, actively engaged in shaping educational strategies and overseeing key academic initiatives. He holds leadership roles in various university committees, where he influences decision-making processes and contributes to the growth of the institution. Dr. Akın is also deeply involved in supervising multiple postgraduate theses, guiding students through their research journeys. His commitment to academic excellence and leadership is evident in his continuous efforts to enhance the university’s educational framework and support the next generation of scholars. 🎓📚💼👨‍🏫

Non-Academic Experience

Dr. Akın has significantly contributed to various legal proceedings by offering his expert knowledge in electrical engineering and technology. His insights have proven invaluable in legal contexts, showcasing his ability to bridge the gap between technical expertise and legal matters. With a strong background in engineering, Dr. Akın has applied his skills in areas like patent law, intellectual property, and technology-related disputes. His versatility in both technical and legal domains has enhanced his professional reputation, allowing him to be a trusted expert in his field. ⚖️🔌📚💡

Projects

B. Akın has contributed to various projects focused on power electronics and renewable energy systems. Key projects include the development of a safe onboard charging unit for electric vehicle batteries (TÜBİTAK, 2023) and a three-phase power factor correction circuit for charging stations (TÜBİTAK, 2022-2023). He also worked on a compact DC/DC converter (2020-2021), a smart turnstile system (TÜBİTAK, 2018-2019), and solutions for reducing the impact of energy-efficient lamps on the grid (2015-2017). Other notable projects include induction ovens (2011-2013) and power factor correction circuits (2005-2008), emphasizing renewable energy applications 🌍🔋⚡.

Book Chapters

Assist. Prof. Dr. Burak Akın contributed to several important topics in physics in 2015. He authored chapters in the book Fen ve Mühendisler için Fizik (Physics for Science and Engineers), edited by D. Esra Yıldız, Erol Kurt, and H. Hilal Kurt, published by Nobel Yayın Dağıtım. His chapters include Kinetic Theory of Gases (pp. 1-17), Temperature, Heat, and Heat Transfer (pp. 1-17), and The First and Second Laws of Thermodynamics (pp. 1-17). These works have provided valuable insights into fundamental principles of physics for engineering and science students. ⚛️📚🌡️

Research Focus

Assist. Prof. Dr. Burak Akın’s research primarily focuses on optimization techniques for energy systems, particularly in photovoltaic (solar power) applications. His work includes innovative algorithms such as the grey wolf optimization and hybrid particle swarm algorithms for efficient energy management, battery charging, and maximum power point tracking (MPPT). Additionally, he explores feedback control systems and converter designs, aiming to improve energy storage systems and power conversion efficiency. His contributions support sustainable energy solutions, particularly in optimizing the performance of solar and battery systems. 🌞⚡🔋🧑‍💻

Publication Top Notes

A modified multi-stepped constant current based on gray wolf algorithm for photovoltaics applications

An improved constant current step-based grey wolf optimization algorithm for photovoltaic systems

Transformer rail-tapped buck-boost converter design-based feedback controller for battery charging systems

MPPT mechanism based on novel hybrid particle swarm optimization and salp swarm optimization algorithm for battery charging through simulink

A novel hybrid series salp particle Swarm optimization (SSPSO) for standalone battery charging applications

Improved salp swarm algorithm based on particle swarm optimization for maximum power point tracking of optimal photovoltaic systems

DESIGN AND ANALYSIS OF A FLYBACK CONVERTER WITH IMPROVED SNUBBER CELLS

Mohammad Divandari | Electronic Engineering | Best Researcher Award

Published on 17/12/202417/12/2024 by Global Academic Awards

Assist. Prof. Dr. Mohammad Divandari | Electronic Engineering | Best Researcher Award

Assist. Prof. Dr. Mohammad Divandari, Islamic Azad University, Iran

Assist. Prof. Dr. Mohammad Divandari is an Assistant Professor of Electrical Engineering/Control Systems at Islamic Azad University, Iran. He holds a Ph.D. in Electrical Engineering from Babol Noshirvani University (2019) with a thesis on switched reluctance motor drives. His research interests include electrical motor theory, control systems, and non-linear control. Dr. Divandari has extensive industry experience, having worked in JEMCO Company in various technical roles from 1998 to 2007. He is skilled in simulation, embedded systems, and electrical drive implementation. He is a member of IEEE and the Iranian Inventors Association. 🧑‍🏫🔧💡📚

Publication Profile

Orcid

Google Scholar

Educational Background

Assist. Prof. Dr. Mohammad Divandari earned his Ph.D. in Electrical Engineering from Babol Noshirvani University of Technology in 2019, focusing on the design and implementation of a switched reluctance motor drive with DSP-TMS320F28335, earning a high score of 19.75/20. He completed his M.Sc. in Control Systems at Islamic Azad University, Tehran, in 2003, where his thesis on fuzzy logic control of switched reluctance motors earned him a score of 19/20. Dr. Divandari also holds a B.Sc. in Electronic Engineering from Islamic Azad University, Sabzevar (1998), with a thesis on DC/AC converter design, scoring 18.5/20. 💡🔧📚

Professional Experience

Dr. Mohammad Divandari worked as an Electrical Engineer at JEMCO Company (Jovain Electrical Machines Industries Co.) from 1998 to 2007. His roles included installing and operating machinery (1998-1999), working in machinery adjustment committees with foreign experts (1999-2000), and serving as an expert in the technical documents center (2000-2001). He also contributed to the Research and Development (R&D) department (2001-2003) and later worked in sales engineering within the commercial units (2003-2007). His extensive experience helped shape his expertise in electrical systems and engineering solutions. ⚙️🔧🌍

Academic Experience

Dr. Mohammad Divandari has had extensive teaching experience in Electrical Engineering and Control Systems. From 2004 to 2019, he was a Lecturer at Islamic Azad University, Iran, where he taught a wide range of subjects, including Electronics, Electrical Machines, Control Systems, Power Electronics, and Pattern Recognition. He also conducted labs on Linear Control Systems, Non-linear Control, and Instrumentation. Since 2019, he has served as an Assistant Professor, continuing his impactful work in teaching and mentoring future engineers. His contributions significantly shape the next generation of electrical engineers. 📚⚡️

Software Expertise

Assist. Prof. Dr. Mohammad Divandari has extensive expertise in software tools for simulation and embedded systems. He is proficient in MATLAB/SIMULINK, PLECS, and ANSYS/Maxwell for FEM simulations. His experience extends to embedded systems, specifically with DSP TMS320F28335 using Code Composer Studio for C programming. Additionally, he has hands-on experience with Cadence SPB/OrCAD for Pspice and circuit analysis and Altium Designer for PCB design (two-layer, metalized). His skills in these advanced tools support his research and development in electrical engineering. 🖥️🔧📐

Honors and Award

In recognition of his innovative contributions, Assist. Prof. Dr. Mohammad Divandari received a patent in 2001–2002 for an automatic device designed to measure the pressure of automobile tires. This device is adjustable to optimize energy consumption in automobiles. The patent, registered under No. 013233 in Iran on March 13, 2006, showcases his commitment to advancing technology in the automotive and energy sectors. This achievement highlights his inventive approach to solving practical engineering challenges. 🚗🔧⚡

Research Focus

Assist. Prof. Dr. Mohammad Divandari’s research focuses on advanced control systems and optimization techniques for switched reluctance motor (SRM) drives, with a strong emphasis on fuzzy logic control to reduce torque ripple and acoustic noise. His work extends to sensorless motor drives, dynamic observers, and electromagnetic levitation systems. Additionally, Dr. Divandari explores brushless DC motors, power electronic systems, and micro-turbine control. His contributions have had significant impacts on energy efficiency, control systems, and motor design. 🌍🔌📉 His work is essential in the electrical engineering and control systems domains.

Publication Top Notes

Radial force and torque ripple optimization for acoustic noise reduction of SRM drives via fuzzy logic control (Cited by: 52, Year: 2010) ⚙️📉
Speed control of switched reluctance motor via fuzzy fast terminal sliding-mode control (Cited by: 44, Year: 2019) ⚡📊
A novel dynamic observer and torque ripple minimization via fuzzy logic for SRM drives (Cited by: 32, Year: 2009) 🔄🔧
Tooth profile modification and its effect on spur gear pair vibration in presence of localized tooth defect (Cited by: 27, Year: 2012) ⚙️🔍
A novel sensorless SRM drive via hybrid observer of current sliding mode and flux linkage (Cited by: 23, Year: 2007) 🚗🔩
Torque estimation of sensorless SRM drive using adaptive-fuzzy logic control (Cited by: 18, Year: 2016) 🧠⚙️
High performance SRM drive with hybrid observer and fuzzy logic torque ripple minimization (Cited by: 15, Year: 2007) 🔋🔧
Conversion of shaded-pole induction motor to switched reluctance motor and effects of pole shoe and notch on SRM noise (Cited by: 13, Year: 2013) 🔊🔩
Single phase application of space vector pulse width modulation for shunt active power filters (Cited by: 13, Year: 2007) ⚡🔌
Robust speed control of switched reluctance motor drive based on full order terminal sliding mode control (Cited by: 11, Year: 2020) ⚙️🛠
A novel control-rod drive mechanism via electromagnetic levitation in MNSR (Cited by: 10, Year: 2014) ⚡🔮
Sensorless drive for switched reluctance motor by adaptive hybrid sliding mode observer without chattering (Cited by: 9, Year: 2018) ⚙️🔧
Acoustic noise reduction of switched reluctance motor drives (Cited by: 7, Year: 2011) 🔇🔧
Improved analytical nonlinear model for switched reluctance motor using Gaussian distribution probability density function (Cited by: 6, Year: 2018) 🧠🔩
Minimizing torque ripple in a brushless DC motor with fuzzy logic: applied to control rod driving mechanism of MNSR (Cited by: 5, Year: 2015) ⚡🔧

Benkun Tan | Engineering | Best Researcher Award

Published on 05/11/202405/11/2024 by Global Academic Awards

Benkun Tan | Engineering | Best Researcher Award

Dr Benkun Tan, Hunan University of Arts and Sciences, China

Dr. Benkun Tan is a Ph.D. candidate at Changsha University of Science and Technology, specializing in Civil Engineering. His research focuses on steel-concrete composite structures, with significant contributions including studies on temperature field prediction and fatigue damage analysis. Notable publications include “Temperature Field Prediction of Steel-Concrete Composite Decks” and “Fatigue Crack Propagation in Stud Connectors.” Dr. Tan’s work is published in reputable journals such as Journal of Zhejiang University-SCIENCE A and Sustainability. His innovative approach enhances the understanding of structural integrity and performance. 🌉📚✨

Publication profile

Orcid

Education

Changsha University of Science and Technology, located in Changsha, China, has been the academic home of a Ph.D. candidate in the School of Civil Engineering since September 1, 2019. This institution is renowned for its comprehensive engineering programs, providing a robust curriculum that integrates theoretical knowledge with practical application. The focus on civil engineering equips students with the skills needed to tackle modern infrastructure challenges. Engaging with experienced faculty and participating in cutting-edge research, the candidate is poised to make significant contributions to the field. 📚🏗️🌍

Research focus

Benkun Tan is an emerging researcher in the field of civil engineering, specifically focusing on steel-concrete composite structures. His research encompasses temperature field prediction, multiaxial fatigue damage analysis, and fatigue crack propagation in composite beams and connectors. Tan employs innovative methods, including ensemble algorithms and numerical simulations, to enhance the durability and performance of composite materials in construction. His contributions aim to optimize design and layout for temperature measurement in bridges, thereby improving structural integrity and safety. With a commitment to sustainability, Tan’s work is significant for advancing engineering practices in the built environment. 🔧🏗️📊

Publication top notes

Temperature field prediction of steel-concrete composite decks using TVFEMD-stacking ensemble algorithm

Multiaxial Fatigue Damage Analysis of Steel–Concrete Composite Beam Based on the Smith–Watson–Topper Parameter

Optimization Method of Temperature Measuring Point Layout for Steel-Concrete Composite Bridge Based on TLS-IPDP

Fatigue Crack Propagation and Life Analysis of Stud Connectors in Steel-Concrete Composite Structures

Numerical Study on Stress Intensity Factors for Stud Connectors of Steel–Concrete Connection

Conclusion

Dr. Tan’s research portfolio demonstrates consistent contributions to the fields of temperature modeling, fatigue analysis, and lifecycle assessment of steel-concrete composite structures, underscoring his suitability for the Best Researcher Award in civil engineering. His innovative methodologies and practical applications in composite structures align with the award’s focus on impactful and forward-thinking research in the field.